Brother MFC-5895CW User Manual

4
3
Connect the power cord
and telephone line
a Connect the power cord.
b Connect the telephone line cord. Connect one
end of the telephone line cord to the jack on the
machine marked LINE and the other end to a
modular wall jack.
IMPORTANT
DO NOT connect the USB cable yet (if you are
using a USB cable).
IMPORTANT
The telephone line cord MUST be connected
to the jack on the machine marked LINE.
Note
If you are sharing one telephone line with an
external telephone, connect it as shown below.
Before you connect the external telephone,
remove the protective cap a from the EXT. jack
on the machine.
1 Extension telephone
2 External telephone
Note
If you are sharing one telephone line with an
external telephone answering machine, connect it
as shown below.
Before you connect the external telephone
answering machine, remove the protective cap a
from the EXT. jack on the machine.
Set the receive mode to External TAD if
you have an external answering machine. See
Choose the correct Receive Mode on page 8.
For additional details, see Connecting an
external TAD (telephone answering device) in
Chapter 7 of the User’s Guide.
11
22
1
1
1

Brother MFC-5895CW Specifications

General

Scan speed	4.83 sec/page
All-in-one functions	Copy, Fax, Scan
Color all-in-one functions	copy, fax, print, scan
Scan to	e-Mail, File, Image, OCR
PC free copying	Yes
Total number of input trays	1
Processor family	RISC
Non-ISO print media sizes	Letter
JIS B-series sizes (B0...B9)	B4, B5
Maximum ISO A-series paper size	A3
Auto Document Feeder (ADF) media weight	60 - 90 g/m²
Security algorithms	128-bit WEP, 64-bit WEP, SSID, WPA-PSK, WPA2-PSK
Package weight	15700 g
Faxing	Color faxing
Power consumption (PowerSave)	0.8 W
Digital sender	No
Market positioning	Home & office