What to do if my Brother MFC-5440CN All in One Printer says 'Disconnected'?
If your Brother All in One Printer displays 'Disconnected', it means the other party or their fax machine ended the call. Try sending or receiving again.
What to do if my Brother MFC-5440CN All in One Printer shows 'Connection Fail'?
If your Brother All in One Printer displays 'Connection Fail', it means you tried to poll a fax machine that is not in Polled Waiting mode. Check the polling setup on the other fax machine.
What to do if my Brother MFC-5440CN shows 'Data Remaining'?
If your Brother All in One Printer displays 'Data Remaining', it means print data is still in the printer's memory. Try restarting the print job from your computer. If the issue persists and you have a MFC-5440CN model, press the Job Cancel button. If you have a MFC-5840CN model, press Stop/Exit. This will cancel the job and eject the page being printed. This issue might occur if the USB cable was disconnected during data transfer.
Why does my Brother All in One Printer say 'Comm.Error'?
A 'Comm.Error' message on your Brother All in One Printer indicates a communication error, often due to poor phone line quality. Try the call again. If the problem persists, contact your telephone company to inspect your phone line.
What to do if my Brother MFC-5440CN All in One Printer says 'Cover is Open'?
If your Brother All in One Printer shows 'Cover is Open', it means the scanner cover isn't completely closed. Lift the scanner cover and close it firmly.
General| Functions | Print, Copy, Scan, Fax |
|---|---|
| Print Resolution | 6000 x 1200 dpi |
| Scanner Type | Flatbed |
| Scanner Resolution | 1200 x 2400 dpi |
| Copy Resolution | 600 x 600 dpi |
| Fax Modem Speed | 33.6 Kbps |
| Paper Capacity | 250 sheets |
| Monthly Duty Cycle (max) | 15, 000 pages |
| Total Memory Capacity | 32 MB |
| Display | LCD |
| Connectivity | USB 2.0, Ethernet |
| Operating System Support | Windows, Mac |
To Next Page
