Brother MFC-5440CN - To Select or Change Your Receive Mode; Setting the Ring Delay

4 - 2 SETUP RECEIVE
To select or change your Receive Mode
1
Press
Menu/Set
,
0
,
1
.
2
Press
▲
or
▼
to select
Fax Only
,
Fax/Tel
,
External TAD
or
Manual
.
Press
Menu/Set
.
3
Press
Stop/Exit
.
Setting the Ring Delay
The Ring Delay sets the number of times the MFC rings before it
answers in
Fax Only
or
Fax/Tel
mode. If you have extension
phones on the same line as the MFC or subscribe to the telephone
company’s service, keep the Ring Delay setting of 4.
(See
Operation from extension telephones
on page A-14 and
Fax
Detect on page 4-4.)
1
If it is not illuminated in green, press (
Fax
).
2
Press
Menu/Set
,
2
,
1
,
1
.
3
Press
▲
or
▼
to select how many times the line rings before the
MFC answers (02 - 10 for Australia, 01 - 10 for New Zealand, 00
- 10 for some countries).
Press
Menu/Set
.
(If you select 00, the line won’t ring at all.)
4
Press
Stop/Exit
.
Current Receive Mode
Fax
: Fax Only
F/T
: Fax/Tel
TAD
: External TAD
Mnl
: Manual