5-24
Confidential
1.3.14 Set country/language (function code: 52)
<Function>
This function is user accessible, and is used to customize the EEPROM according to the
language, function settings, and worker switch settings.
<Operation Procedure>
Note:
• This function can be used only in the following nations: France, Belgium, Holland,
Norway, Sweden, Finland, Denmark, Austria, Czech, Hungary, Poland, General
(Others), Bulgaria, Romania, Slovakia, Spain, Portugal
Non touch panel models
(1) Press the [2] and [5] buttons in this
order in the initial state of maintenance
mode. "Set Country" is displayed on
LCD, and names of country in their
respective language follows.
(2) Press the [ ] or [ ] button to select
country, and press the [OK] button. The
selected country is displayed in its
language for confirmation.
(3) Press "Yes" if the displayed country is
correct, and press the [OK] button. The
EEPROM is now customized, and the
machine returns to the ready state.
Touch panel models
(1) Press the [2] and [5] buttons in this
order in the initial state of maintenance
mode. "Set Country" is displayed on
LCD, and names of country in their
respective language follows.
(2) Press the name of country desirable for
the user. The selected country is
displayed in its language for
confirmation.
(3) Press "Yes" if the displayed country is
correct. The EEPROM is now
customized and the machine returns to
the ready state.
Note:
• The country name indicated on the LCD varies depending on the area (code input in
Function code 74) as shown in the table below.
Germany
Austria
France
Belgium
Netherlands
Oceania
Pan-Nordic
Iberia East Europe
South Africa
Turkey
Gulf
Deutschland
France Australia Norge España österreich South Africa
österreich België /
Belgique
New
Zealand
Suerige
Portugal Cheska republika
Trkiye
Nederland Suomi Italia Magyaroraz g Others
Danmark Polska
Others
Rom nia
Slovensko
Others
To Next Page
Loading...
