Brother MFC-J2510 - Scanning to a Computer; Scan to PDF via ControlCenter4 (Windows)

11
11
Fax Transmission Report
Your Brother machine is equipped with a
Transmission Verification Report that can be used as
confirmation that you sent a fax. This report lists the
name or fax number of the receiving party, the date,
time, and duration of the transmission, the number of
pages transmitted, and whether or not the
transmission was successful.
Instructions on using this feature uuBasic User’s
Guide: Transmission Verification Report
12
Set Tone or Pulse dialling
mode (Not available in
New Zealand)
Your machine comes set for Tone dialling service. If
you have a Pulse dialling service (rotary), you need to
change the dialling mode.
a Press .
b Press All Settings.
c Swipe up or down, or press a or b to display
Initial Setup.
Press Initial Setup.
d Press Tone/Pulse.
e Press Pulse (or Tone).
f Press .
13
Set the telephone line
compatibility (VoIP)
If you are connecting the machine to a VoIP service
(over the Internet) we recommend that you change
the modem speed to minimize errors in fax
operations.
a Press .
b Press All Settings.
c Swipe up or down, or press a or b to display
Initial Setup.
Press Initial Setup.
d Swipe up or down, or press a or b to display
Compatibility.
Press Compatibility.
e Press Basic(for VoIP).
f Press .
NOTE
If you are using an analogue telephone line you
can skip this step.