Brother MFC-J6510DW

10
9
Set the date and time
The machine displays the date and time, and if you
set up the station ID, it will add it to each fax you send.
a Press Menu.
b Press a or b to choose Initial Setup.
Press OK.
c Press a or b to choose Date&Time.
Press OK.
d Enter the last two digits of the year on the dial
pad, and then press OK.
e Enter the two digits for the month on the dial
pad, and then press OK.
f Enter the two digits for the day on the dial pad,
and then press OK.
g Press a or b to choose 12h Clock or 24h
Clock, and then press OK.
h Enter the time on the dial pad, and then press
OK.
i (12h Clock only)
Press a or b to choose AM or PM, and then press
OK.
j Press Stop/Exit.
10
Set your Station ID
You should store your name and fax number to be
printed on all fax pages that you send.
For details, see Entering Text in Appendix C of the
Basic User’s Guide.
a Press Menu.
b Press a or b to choose Initial Setup.
Press OK.
c Press a or b to choose Station ID.
Press OK.
d Enter your fax number (up to 20 digits) on the
dial pad, and then press OK.
e Enter your name (up to 20 characters) using
the dial pad, and then press OK.
f Press Stop/Exit.
(e.g. Enter 1 1 for 2011.)
Date&Time
Date&Time
Year:20
Input & Press
OK
11
Date&Time
Date&Time
12 or 24 ?
Select & Press
OK
12h Clock
24h Clock
Date&Time
Date&Time
AM or PM ?
Select & Press
OK
AM
PM
Note
• See the following chart for entering your name.
• If you need to enter a character that is on the
same key as the character before, press c to
move the cursor to the right.
• If you entered a character incorrectly and want
to change it, press d or c to move the cursor to
the incorrect character, press Clear.
Press
key
One
time
Two
times
Three
times
Four
times
Five
times
2 ABC2A
3 DEF3D
4 GH I 4G
5 JKL5J
6 MNO6M
7 PQRS 7
8 TUV8T
9 WXY Z 9
Note
If you make a mistake and want to start again,
press Stop/Exit and go back to a.