EasyManua.ls Logo

Brother MFC-J6510DW - User Manual

Brother MFC-J6510DW
271 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
®
Users Guide
Users Guide
PANTONE2728
Advanced User’s Guide
Safety and Legal
Basic User’s Guide

Table of Contents

Other manuals for Brother MFC-J6510DW

Questions and Answers

  • H
    harrisstacySep 3, 2025
    How to fix 'No Ink Cartridge' error on Brother All in One Printer?
    • F
      forddavidSep 3, 2025
      If your Brother All in One Printer displays a 'No Ink Cartridge' error, it likely means that an ink cartridge is not installed properly. To resolve this, take out the ink cartridge and re-install it slowly until it clicks into place.
  • M
    Michael WrightAug 25, 2025
    Why does my Brother MFC-J6510DW All in One Printer only print in B&W and says 'Replace Ink'?
    • J
      jasoncarterAug 26, 2025
      If your Brother All in One Printer is only printing in black and white and displays a 'Replace Ink' message, it means that one or more of the color ink cartridges have reached the end of their life. Replace the ink cartridges to restore color printing.
  • J
    Joseph CollinsSep 23, 2025
    How to fix Brother MFC-J6510DW that cannot detect the origin of the carriage?
    • S
      Scott BaxterSep 23, 2025
      If your Brother All in One Printer cannot detect the origin of the carriage, detected by the CR encoder, reset the carriage assembly.
  • N
    Nicholas PerkinsSep 10, 2025
    How to check if network devices are working properly with Brother MFC-J6510DW?
    • T
      Tina LeeSep 10, 2025
      To check if your network devices are working properly with your Brother All in One Printer, first ensure that your Brother machine, access point/router, or network hub are turned on. Then, 'ping' the Brother machine from your computer using the IP address or the node name. If successful, your Brother machine is working correctly and connected to the same network as your computer. Also, print the WLAN Report to confirm the state of a wireless connection.
  • E
    Eugene HebertSep 16, 2025
    Why does my Brother All in One Printer say 'Wrong Ink Color'?
    • E
      Eric FordSep 16, 2025
      If your Brother All in One Printer displays 'Wrong Ink Color', it means a color ink cartridge has been installed in the black ink cartridge position. Check the ink cartridges and move them to their correct positions according to color.
  • M
    Molly ClarkSep 6, 2025
    How to fix 'Connection Fail' on Brother All in One Printer when polling?
    • T
      Todd WoodsSep 6, 2025
      The 'Connection Fail' message on your Brother All in One Printer when polling indicates that you tried to poll a fax machine that is not in Polled Waiting mode. Check the other fax machine's polling setup to ensure it is correctly configured.
  • R
    Ruth HensonAug 31, 2025
    Why Brother MFC-J6510DW cannot identify magenta ink cartridge?
    • K
      katherinenorrisAug 31, 2025
      If your Brother All in One Printer cannot identify a magenta ink cartridge, it might be because the sensing timing of the ink remaining sensor, ink cartridge detection sensor, and high-yield ink cartridge sensor is off. Replacing the magenta ink cartridge may resolve this issue.
  • M
    Michael KingNov 23, 2025
    Why is my Brother MFC-J6510DW All in One Printer not feeding paper?
    • R
      Robert HamiltonNov 23, 2025
      Your Brother All in One Printer might not be feeding paper due to several reasons. It could be that the machine is out of paper or the paper is not properly loaded in the paper tray. Refill the paper or remove and reload it properly, then press Black Start or Color Start. Alternatively, there might be a paper jam. Remove any jammed paper. If you often see this error when making a duplex copy or print, the paper feed rollers may be stained with ink, so clean them. It's also possible that paper powder has accumulated on the paper pick-up rollers and the back sides of the paper feed rollers, requiring you to clean them. Ensure the Jam Clear Cover is closed evenly at both ends, or that the paper is inserted in the center position of the manual feed slot before pressing Black Start or Color Sta...
  • M
    mary48Sep 13, 2025
    How do I fix 'Out of Memory' error on my Brother All in One Printer?
    • J
      Jacob JacobsSep 13, 2025
      If your Brother All in One Printer shows 'Out of Memory', it means the machine's memory is full. If a copy operation is in progress, press Stop/Exit and wait for other operations to finish before trying again. Alternatively, if you're using a memory card or USB drive, delete unused files to free up space.
  • B
    Bradley EllisonAug 28, 2025
    Why is my Brother All in One Printer only printing in black and white and says 'Replace Ink'?
    • M
      Margaret GomezAug 28, 2025
      If the Brother All in One Printer displays 'B&W Print Only Replace Ink', it means one or more color ink cartridges have reached their end of life. Replace the ink cartridges as described in the manual ('Replacing the ink cartridges on page 67').

Summary

General Information

Symbols and Conventions

Explains symbols and conventions used in the documentation.

Safety and Legal

Hazard Definitions

Explains WARNING, CAUTION, and IMPORTANT alerts for user safety.

Choosing a Location

Environmental and Placement Warnings

Crucial warnings about environmental factors and placement to prevent hazards.

Using the Machine Safely

Electrical and Fire Hazards

Critical warnings regarding electrical shock, fire, and the use of flammable substances.

Brother MFC-J6510DW Specifications

General IconGeneral
Print technologyInkjet
Maximum resolution1200 x 6000 DPI
Economical printingYes
Duplex printing modeAuto
Print speed (black, normal quality, A4/US Letter)35 ppm
Print speed (color, normal quality, A4/US Letter)27 ppm
Digital senderNo
Printing colorsBlack, Cyan, Magenta, Yellow
Maximum duty cycle- pages per month
Number of print cartridges4
Scan toE-mail, File, FTP, Image, OCR
Scanner typeFlatbed & ADF scanner
Grayscale levels256
Input color depth48 bit
Maximum scan areaA3 (297 x 420) mm
Output color depth24 bit
Image formats supportedBMP, JPG, TIF
Maximum scan resolution19200 x 19200 DPI
Optical scanning resolution2400 x 2400 DPI
Copier resize25 - 400 %
Maximum copy resolution1200 x 1200 DPI
Maximum number of copies99 copies
Copy speed (black, normal quality, A4)23 cpm
Copy speed (color, normal quality, A4)20 cpm
FaxingColor faxing
Fax memory400 pages
Modem speed33.6 Kbit/s
Fax coding methodsJPEG, MH, MMR (Fax coding method), MR
Fax speed dialing (max numbers)100
Paper input typePaper tray
Total input capacity250 sheets
Total output capacity50 sheets
Total number of input trays1
Auto document feeder (ADF) input capacity35 sheets
Processor familyRISC
Compatible memory cardsMemory Stick (MS), MMC, MS PRO, SD, SDHC
Sound pressure level (printing)50 dB
DisplayLCD
Product colorBlack
Display diagonal3.3 \
Market positioningBusiness
Custom media width148 - 297 mm
Maximum print size297 x 432 mm
Custom media length148 - 431.8 mm
Paper tray media typesGlossy paper, Photo paper, Plain paper, Transparencies
Paper tray media weight64 - 220 g/m²
Non-ISO print media sizesLetter
ISO A-series sizes (A0...A9)A3, A4, A5, A6
Photo paper sizes (imperial)5x7, 5x8 \
Borderless printing media sizes5x7, A3, A4, A6, Index card, Letter
Maximum ISO A-series paper sizeA3
Auto Document Feeder (ADF) media weight64 - 90 g/m²
Wi-Fi standards802.11b, 802.11g, Wi-Fi 4 (802.11n)
Security algorithms128-bit WEP, 64-bit WEP, SSID, WPA-AES, WPA-PSK, WPA-TKIP, WPA2-PSK
Mobile printing technologies-
Standard interfacesUSB 2.0
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Scan speed3.49 sec/page
Dimensions (WxDxH)540 x 489 x 257 mm
All-in-one functionsCopy, Fax, Print, Scan
Color all-in-one functionscopy, fax, print, scan
AC input voltage220 - 240 V
AC input frequency50 - 60 Hz
Power consumption (standby)7.5 W
Power consumption (PowerSave)4 W
Power consumption (average operating)26 W
Sustainability certificatesENERGY STAR
Package weight22.400 g
Bundled softwareBrother MFL-Pro Suite\\r Brother ControlCentre4 (Win)\\r Nuance® Paperport® 12 SE + OCR (Win)\\r Reallusion® FaceFilter Studio (Win8)\\r Brother ControlCentre2 (Mac)\\r NewSoft® Presto!® PageManager9 (Mac)
Mac operating systems supportedMac OS X 10.4 Tiger, Mac OS X 10.5 Leopard, Mac OS X 10.6 Snow Leopard, Mac OS X 10.7 Lion
Server operating systems supportedWindows 2000 Advanced Server, Windows 2000 Server, Windows Server 2003, Windows Server 2003 x64, Windows Server 2008, Windows Server 2008 R2, Windows Server 2008 x64
Windows operating systems supportedWindows 2000, Windows 2000 Professional, Windows 7 Home Premium, Windows 7 Home Premium x64, Windows 7 Professional, Windows 7 Professional x64, Windows 7 Starter, Windows 7 Starter x64, Windows 7 Ultimate, Windows 7 Ultimate x64, Windows Vista Business, Windows Vista Business x64, Windows Vista Home Basic, Windows Vista Home Basic x64, Windows Vista Home Premium, Windows Vista Home Premium x64, Windows Vista Ultimate, Windows Vista Ultimate x64, Windows XP Home, Windows XP Home x64, Windows XP Professional, Windows XP Professional x64
Weight and Dimensions IconWeight and Dimensions
Depth489 mm
Width540 mm
Height257 mm

Related product manuals