Brother MFC-J6510DW - Changing One Touch or Speed Dial Names or Numbers

Chapter 7
52
g To choose where the number will be
stored, do one of the following:
 To accept the displayed next
available Speed Dial location, press
OK.
 To enter a different Speed Dial
location, press the 2-digit number
using the buttons on the
Touchscreen.
Press OK.
Note
If the 2-digit Speed Dial location you
choose is already taken, the OK button on
the LCD will not work. Choose a different
location.
h When the LCD shows your settings,
press OK to confirm.
i Do one of the following:
 To store another Speed Dial
number, repeat steps b to h.
 To finish storing numbers, press
Stop/Exit.
Changing One Touch or
Speed Dial names or numbers7
You can change or delete a One Touch or
Speed Dial name or number that has already
been stored.
a Press (Phone Book).
b Press More.
c Do one of the following:
 Press Change to edit the names or
numbers.
 Press Delete to delete all
information in a Speed Dial or One
Touch location.
Press the number you want to delete.
Press OK.
Press Yes to confirm.
Go to step h.
d Press a or b to display the number you
want to change.
e Press the number you want to change.
Note
One Touch Dial locations begin with l.
Speed Dial locations begin with #.