Brother MFC-J6510DW - Beeper Volume; Speaker Volume

Chapter 1
2
Beeper Volume 1
When the beeper is on, the machine will beep
when you press a key, make a mistake, or
after you send or receive a fax.
You can choose a range of beeper volume
levels, from High to Off.
a Press MENU.
b Press a or b to display
General Setup.
c Press General Setup.
d Press a or b to display Volume.
e Press Volume.
f Press Beeper.
g Press Low, Med, High or Off.
h Press Stop/Exit.
Speaker Volume 1
You can choose a range of speaker volume
levels, from High to Off.
a Press MENU.
b Press a or b to display
General Setup.
c Press General Setup.
d Press a or b to display Volume.
e Press Volume.
f Press Speaker.
g Press Low, Med, High or Off.
h Press Stop/Exit.
You can also adjust the speaker volume by
pressing Hook.
a Press Hook on the control panel.
b Press d or c on the Touchscreen to
display the Volume button.
c Press Volume.
d Press d or c on the Touchscreen.
Each button press changes the volume
to the next setting.
e Press Hook on the control panel.