Sending a fax
27
4
c You can change the following fax
sending settings. Press FAX and then
press d or c to scroll through the fax
settings. When the setting you want is
displayed, press it and choose your
option.
(Basic User’s Guide)
For details about changing the following
fax sending settings, see pages 28 to
29.
Glass ScanSize
Color Fax Transmission
Preview Outgoing Fax
Transmission Verification Report
(Setup)
(Advanced User’s Guide)
For more advanced fax sending
operations and settings
uuAdvanced User’s Guide: Sending a
fax
Contrast
Fax Resolution
Set New Defaults
Factory Reset
Faxing at End of Call
Broadcasting
Real Time Transmission
Overseas Mode
Delayed Fax
Batch Transmission
Canceling Waiting Jobs
Polled Transmit
d Enter the fax number.
Using the dial pad
Using Speed Dial
Speed Dial
Using call history
Outgoing Call
Caller ID hist.
You can preview a fax message before
sending it by setting Preview to On. (See
How to preview an outgoing fax
uu page 28.)
e Press Black Start or Color Start.
Faxing from the ADF
The machine starts scanning and
sending the document.
Faxing from the scanner glass
If you pressed Black Start, the
machine starts scanning the first
page. Go to step f.
If you pressed Color Start, the LCD
asks if you want to send a color fax.
Press Yes to confirm. The machine
starts scanning and sending the
document.
f When the LCD asks you Next Page?,
do one of the following:
To send a single page, press No (or
press Black Start again).
The machine starts sending the
document.
To send more than one page, press
Yes and go to step g.
g Place the next page on the scanner
glass.
Press Black Start or Color Start.
The machine starts scanning the page.
(Repeat steps f and g for each
additional page.)
To Next Page
Loading...
Need help?
General
Weight and Dimensions
