• Black & White
Use for text or line art images.
• Gray (Error Diffusion)
Use for photographic images or graphics. (Error Diffusion is a method for creating simulated gray
images without using true gray dots. Black dots are put in a specific pattern to give a gray appearance.)
• True Gray
Use for photographic images or graphics. This mode is more accurate because it uses up to 256
shades of gray.
• 24bit Color
Use to create an image with the most accurate color reproduction. This mode uses up to 16.8 million
colors to scan the image, but it requires the most memory and has the longest transfer time.
Document Size
The document size is set to Letter by default. For faster scan speeds, select the exact size of your document
from the Document Size drop-down list.
• If you select the 1 to 2 (A4) option, the scanned image will be divided into two A5-size documents.
Brightness
Set the Brightness level by dragging the slider to the right or left to lighten or darken the image. If the
scanned image is too light, set a lower brightness level and scan the document again. If the image is too dark,
set a higher brightness level and scan the document again. You can also type a value into the field to set the
Brightness level.
Contrast
Increase or decrease the Contrast level by moving the slider to the right or left. An increase emphasizes dark
and light areas of the image, while a decrease reveals more details in gray areas. You can also type a value
into the field to set the Contrast level.
Continuous Scanning
Select this option to scan multiple pages from the scanner glass or ADF (available only for certain models) .
After a page is scanned, either continue scanning or finish. Use this method to scan more pages than the
maximum ADF capacity.
Auto Crop
Scan multiple documents placed on the scanner glass. The machine will scan each document and create
separate files or a single multi-page file.
ID Card Scan
Select this check box to scan both sides of the identification card onto one page.
Advanced Settings
Configure advanced settings by clicking the Advanced Settings button in the scan settings dialog box.
• Remove Background Color
Select this option to remove the base color of documents to make the scanned data more recognizable.
When you use this feature, select from three settings: high, medium and low.
Default
Select this option to restore all settings to their factory setting values.
Related Information
• Scan Using ControlCenter4 Advanced Mode (Windows
®
)
166
To Next Page
Loading...
Need help?
General
Weight and Dimensions
