5-58
Confidential
1.3.30
Send communication log information to telephone line (function code: 87)
<Function>
This function is used to send the error list to service personnel at a remote service station
when a fax communication problem has occurred in the user's machine. Receiving the error
list allows the service personnel to analyze the problem current in the user's machine.
<Operating Procedure>
• Service side
(1) Make a call from the service side equipment to the user side equipment.
• User side
(2) Press and hold the [Home] key while the machine is in the ready state until the LCD
display changes.
(3) Press and hold the blank field at the bottom of the LCD until the LCD display changes.
(4) Press the [*], [0], [#], [8], and [7] key in this order. "SENDING P.01" is displayed on the
LCD and sending error list starts. When the error list is sent, the machine returns to the
ready state.
• Service side
(5) Once the user side equipment started sending the error list, press the [FAX Start] key.
"Send or Receive? / 1.Send 2.Receive" is displayed on the LCD.
(6) Press the [2] key. Receiving the error list starts.
To Next Page
Loading...
Need help?
General
