Unpack the machine and check the components
NOTE:
•The available connection interfaces vary depending on the
model.
•Interface cables are not included. You must purchase the
correct interface cable if you require one.
USB cable
We recommend using a USB 2.0 cable (Type A/B) that is
no more than 2 metres long.
Network cable
Use a straight-through Category 5e (or greater) twisted-
pair cable.
•The illustrations in this Quick Setup Guide show the
MFC-L8900CDW.
Remove the packing materials and install the drum unit and toner cartridge assembly
Load paper in the paper tray
Connect the power cord and turn the machine on
Select your language (if needed)
Drum Unit* Waste Toner Box* Belt Unit*
Inbox Toner Cartridges*
(Black, Cyan, Magenta and
Yellow)
Telephone Line Cord AC Power Cord USB Interface Cable
Brother Installation Disc Quick Setup Guide Product Safety Guide
3
4
2
1
Adjust the paper
guides.
Back Front
1. On the machine’s Touchscreen, press [所有设置](All Settings) >
[初始设置](Initial Setup) > [语言](Local Language).
2. Press your language.
3. Press .
1
2
4
Do not exceed this mark.
* Already installed in the machine
Remove the packing tape.
Secure Network Access
Your machine’s default password is on the label on the back
of the machine (preceded by “Pwd”).
We strongly recommend you change it to protect your
machine from unauthorised access.
Quick Setup Guide
MFC‑L8900CDW
Read the Product Safety Guide first, then read this Quick
Setup Guide for the correct installation procedure.
The latest manuals are available at the Brother Solutions
Center: www.95105369.com.
1
CHN-ENG
Version B