Brother Network - IPv6

Control panel setup
26
3
f Press Stop/Exit.
IPv6 3
This machine is compatible with IPv6, the next generation internet protocol. If you want to use the IPv6
protocol, choose On. The default setting for IPv6 is Off. For more information on the IPv6 protocol, visit
http://solutions.brother.com/
.
a Press Menu.
b Press a or b to choose Network.
Press OK.
c Press a or b to choose TCP/IP.
Press OK.
d Press a or b to choose IPv6.
Press OK.
e Press a or b to choose On or Off.
Press OK.
f Press Stop/Exit.
Note
If you set IPv6 to On, turn off the power switch and then turn it back on to enable this protocol.