Brother Network - Page 36

Control panel setup
29
3
f Press a or b to choose Name or IP Address.
Press OK.
g Enter the SMTP server address (up to 64 characters).
Press OK.
h Press Stop/Exit.
3
SMTP Port
This field displays the SMTP port number (for outgoing E-mails) on your network.
a Press Menu.
b Press a or b to choose Network.
Press OK.
c Press a or b to choose E-mail/IFAX.
Press OK.
d Press a or b to choose Setup Server.
Press OK.
e Press a or b to choose SMTP Port.
Press OK.
f Enter the SMTP port number.
Press OK.
g Press Stop/Exit.
3
Auth. for SMTP
You can specify the security method for E-mail notification. (For details on security the methods for E-mail
notification, see Security methods for E-mail notification on page 88.)
a Press Menu.
b Press a or b to choose Network.
Press OK.
c Press a or b to choose E-mail/IFAX.
Press OK.
d Press a or b to choose Setup Server.
Press OK.
e Press a or b to choose Auth. for SMTP.
Press OK.