What to do if the power button on my Brother Printer does not light up or flash?
If the power button isn't lighting up, check that the main power switch on the back of the printer is on and that the power supply and adapter cord are correctly connected. If the power button still doesn't light up, contact the retail outlet where the printer was purchased or your local authorized service center.
What to do if Brother P-touch PT-9800PCN Label Maker labels are not ejected correctly after being cut?
If labels are not ejected correctly from your Brother Label Maker after cutting, the cutter blade may be dirty. Clean the cutter.
What to do if Brother P-touch PT-9800PCN printed label contains a blank horizontal line?
If the printed label from your Brother Label Maker contains a blank horizontal line, it may be due to dust on the print head. Clean the print head and head roller.
How to reset a Brother Printer and delete data transferred from the computer?
To reset your Brother printer, turn it off by holding the power button. Then, hold down the power button for two seconds. Continue holding the power button and press the Feed/Cut button six times. This will reset the printer, delete all transferred data, and restore all settings to factory defaults.
What to do if my Brother Printer does not print and I receive a printing error?
If your Brother Printer isn't printing and you're getting an error, ensure the interface cable is correctly connected, the tape cassette is properly installed, and the tape compartment cover is securely closed.
What to do if Brother P-touch PT-9800PCN power button does not light up?
If the power button on your Brother Label Maker doesn't light up or flash, check that the main power switch on the back of the printer is turned on and that the power supply cord is correctly connected. If the power button still doesn't light up, contact the retail outlet where you purchased the printer or your local authorized service center.
What to do if Brother P-touch PT-9800PCN Label Maker does not print and shows a printing error?
If your Brother Label Maker isn't printing and you're seeing an error, check that the interface cable is correctly connected, the tape cassette is properly installed, and the tape compartment cover is fully closed.
General| Brand | Brother |
|---|---|
| Model | P-touch PT-9800PCN |
| Category | Label Maker |
| Language | English |
To Next Page