Why is my Brother Label Maker PT-9500PC not printing?
If your Brother Label Maker PT-9500PC isn't printing and shows a printing error, it might be due to a few reasons. First, ensure the interface cable is correctly connected, the tape cassette is properly installed, and the tape compartment cover is fully closed. Also, avoid connecting the USB interface cable during a serial connection, as this can cause conflicts.
What to do if the power button on my Brother PT-9500PC Label Maker doesn't light up?
If the power button on your Brother Label Maker PT-9500PC doesn't light up or flash, make sure the power supply cord is properly connected. If it still doesn't light up, contact the retail outlet where you bought the PT-9500PC or your local authorized service center.
What to do if a data transmission error appears on the personal computer with Brother PT-9500PC - P-Touch 9500pc B/W Thermal Transfer Printer Label Maker?
If you're seeing a data transmission error on your computer while using the Brother Label Maker PT-9500PC, the issue might be with the port selection. For Windows, make sure you've selected the correct port in the printer Properties dialog box. If you're using a USB connection, choose “USB00n”. For a serial connection, select COM1 if your PT-9500PC is connected to COM1, or COM2 if it's connected to COM2. Also, the baud rates for the personal computer and the PT-9500PC must be the same.
How to fix baud rate setting issues on Brother PT-9500PC?
If you can't set the baud rate using the Change Baud Rate Wizard or the Brother PT-9500PC utilities, it could be due to a few reasons. It might be caused by Error 99, which means the computer can't detect the PT-9500PC. Ensure the PT-9500PC is on, the interface cable is correctly connected, and the COM port selected in the Wizard matches where the PT-9500PC is connected. Also, avoid connecting the USB interface cable during a serial connection. Another reason might be Error 1 or Error 5, meaning the computer's serial port is in use. If so, change the COM port for the serial connection device or connect the PT-9500PC to an unused COM port.
Why does my Brother PT-9500PC - P-Touch 9500pc B/W Thermal Transfer Printer print striped tape?
If you notice striped tape appearing while printing with your Brother Label Maker PT-9500PC, it's likely that the tape cassette is empty. To resolve this, install a new tape cassette, and then either press the feed/cut button or turn the PT-9500PC off and on.
General| Type | Label Maker |
|---|---|
| Print Technology | Thermal Transfer |
| Label Width | 36 mm |
| Connectivity | USB |
| Software Compatibility | Windows, Mac |
| Power Supply | AC Adapter |
| Barcodes | Yes |
| Cutter | Automatic |
| Print Method | Thermal Transfer |
| Interface | USB |
| Display | LCD |
| Weight | 1.5 kg |
| Print Speed | 15 mm/s |
| Media Type | Tape |
| Tape Width | 9, 12, 18, 24, 36 mm |
| Tape Cassette Compatibility | TZe tapes |
| Label Width Range | 3.5 mm - 36 mm |
US regulatory compliance statement for the device.
Covers who is covered, what is covered, and warranty periods.
Details what is not covered and the initial steps for warranty service.
Describes warranty service for the period after the initial 90 days.
Specifies limitations, exclusions, and disclaimers of other warranties.
Provides phone numbers and web addresses for customer support and supplies.
Advises users to record product details and keep proof of purchase.
Lists safety and operational guidelines for the PT-9500PC.
Details precautions for using the AC adapter and tape cassettes.
Advises on proper handling and storage of the CD-ROM.
Explains the intended use of the CD-ROM software.
Lists all items expected to be found in the PT-9500PC package.
Identifies and labels parts visible on the front of the PT-9500PC.
Identifies and labels parts visible on the rear of the PT-9500PC.
Explains the meaning of power and error lamp conditions and their remedies.
Provides step-by-step instructions for connecting the PT-9500PC to power.
Lists the types of tape cassettes compatible with the PT-9500PC.
Details the initial steps for inserting a tape cassette into the printer.
Instructions for assembling the collection tray components.
Steps for connecting the assembled collection tray to the printer.
Guides on installing the printer driver and P-touch Editor software.
Information on designing and creating labels using the software.
Procedure to configure the baud rate on the personal computer.
Instructions for setting the USB ID for multiple PT-9500PC units.
Method for using the PT-9500PC as a shared network printer.
Using the PT-9500PC as a network printer with an optional print server.
Steps to resolve issues with unclear labels via self-cleaning.
Steps for cleaning the printer using specialized cleaning tape.
Steps for cleaning the cutter mechanism of the PT-9500PC.
Common problems, their causes, and solutions for the PT-9500PC.
Detailed technical specifications for the PT-9500PC label printer.
Contact details for locating authorized service centers.
Information for technical support and online resources.
How to order accessories and supplies via phone or mail.
To Next Page