Brother PJ-723 - Page 80

Changing the Printer Settings
72
3
5 Left Margin
Specifies the left margin.
Available settings: [Use Paper Size], [Columns]
6 Right Margin
Specifies the right margin.
Available settings: [Use Paper Size], [Columns]
7 Default Pitch
Specifies character width.
Available settings: [10 characters/inch], [12 characters/inch], [15 characters/inch], [Proportional]
8 CR-LF Mode
Specifies how the printer responds when LF (line feed) and CR (carriage return) commands (ASCII
characters 10 and 13) are received.
Available settings: [LF=LF CR=CR], [LF=CR+LF CR=CR+LF]