Changing the Printer Settings
64
3
5 Disable these settings
When this check box is selected, appears in the tab, and the settings can no longer be specified or
changed.
Settings in a tab where appears will not be applied to the printer even if [Apply] is clicked. In addition,
the settings in the tab will not be saved or exported when the [Save in Command File] or [Export]
command is executed.
To apply the settings to the printer or save or export them, make sure you clear the check box.
The ESC/P Legacy (1) and (2) tabs are linked. When the check box in one of the tabs is selected, the
settings in the other tab also cannot be specified.
6 Parameters
Displays the current settings.
7Exit
Exits [Device Settings], and returns to the main window of the “Printer Setting Tool”.
8 Apply
Applies the settings to the printer.
To save the specified settings in a command file, select [Save in Command File] from the drop-down
menu.
The saved command file can be used with the mass storage mode to apply the settings to a printer. (See
Mass Storage Mode on page 91.)
To Next Page
Loading...
