Changing the Printer Settings
77
3
6 International Character Set
Lists countries for the character set.
Available settings: [United States], [France], [Germany], [Britain], [Denmark], [Sweden], [Italy],
[Spain], [Japan], [Norway], [Denmark II], [Spain II], [Latin America], [Korea], [Legal]
The following 12 codes are switched depending on the country selected from the list above:
23h 24h 40h 5Bh 5Ch 5Dh 5Eh 60h 7Bh 7Ch 7Dh 7Eh
For switched characters, see the P-touch Template Manual/Command Reference (which can be
downloaded from the Brother Solutions Center website).
7 Command Prefix Character
Specifies the prefix character code, which identifies commands used in P-touch Template mode.
8 Non-Printed Character
Characters specified here are not printed when data is received. Specify 1 to 20 characters.
9 Available Return Code
The line feed code is used when feeding data to indicate that the following data should be moved to the
next line in a text object. One of the following four line feed codes can be selected, or 1 to 20 characters
can be specified as the line feed code.
Available settings: [^CR], [\0D\0A], [\0A], [\0D]
10 Number of Copies
Sets the number of copies. A number between 1 and 99 can be specified.
11 Set
Saves the settings as an .ini file when the dialog box is closed.
To save the specified settings in a command file, select [Save in Command File] from the drop-down
menu. The saved command file can be used with the mass storage mode to apply the settings to a printer.
(See Mass Storage Mode on page 91.)
12 Cancel
Cancels the settings and closes the dialog box. The settings will remain unchanged.
13 Default
Returns to the factory settings.
To Next Page
Loading...
