Brother PR-600 User Manual

i
Important Safety Instructions
When using this machine, basic safety precautions should always be taken, including the following:
Read all instructions before using.
DANGER - To reduce the risk of electric shock:
1. The machine should never be left unattended while plugged in. Always unplug the machine
from the electrical outlet immediately after using and before cleaning.
WARNING - To reduce the risk of burns, fire, electric shock, or injury to persons:
1. Do not allow this machine to be used as a toy. Close attention is necessary when the machine is
used by or near children.
2. Use this machine only for its intended use as described in this manual. Use only accessories
recommended by the manufacturer as contained in this manual.
3. Never operate this machine if it has a damaged cord or plug, if it is not working properly, if it has
been dropped or damaged, or dropped into water. Return the machine to the nearest authorized
dealer or service center for examination, repair, and electrical or mechanical adjustment.
4. Never operate the machine with any air openings blocked. Keep ventilation openings of the
machine free from the accumulation of lint, dust, and loose cloth.
5. Never drop or insert any object into any opening.
6. Do not use outdoors.
7. Do not operate where aerosol (spray) products are being used or where oxygen is being
administered.
8. To disconnect, set the main power switch to the “{” position, which represents off, and then
remove the plug from the outlet.
9. Do not unplug by pulling on the cord. To unplug, grasp the plug, not the cord.
10. Keep fingers away from all moving parts. Special care is required around the machine needle.
11. Always use the proper needle plate. The wrong plate can cause the needle to break.
12. Do not use bent needles.
13. Set the main power switch to the “{” position when making any adjustments in the needle area,
such as changing the needle.
14. Always unplug the machine from the electrical outlet when lubricating it or when making any
other user servicing adjustments mentioned in the manual.
15. This sewing machine is not intended for use by young children or infirm persons without
supervision.
16. Young children should be supervised to ensure that they do not play with this machine.
17. Keep fingers out of all sewing machine openings, such as near the carriage, otherwise injuries
may result.
SAVE THESE INSTRUCTIONS
This machine is intended for household use.
Sapphire.book Page i Friday, August 1, 2003 9:12 AM

Brother PR-600 Specifications

General

Brand	Brother
Model	PR-600
Category	Sewing Machine
Language	English

Summary

Important Safety Instructions

General Safety Precautions

Essential safety guidelines for operating the machine to prevent injury and damage.

FCC Declaration of Conformity

Getting Started: Machine Overview

Pre-Operation Guidance

Key instructions for safe operation, service life, and repair.

License Agreement

Terms and conditions governing the use of the machine's content.

Machine Structure and Precautions

Warning Labels and Embroidery Card Precautions

Identification of warning labels and specific precautions for embroidery cards.

Media Care (CompactFlash & Floppy)

Guidelines for the proper care of CompactFlash and floppy disks.

Machine Structure and Features

Six-Needle Embroidery Overview

Explanation of the machine's six-needle embroidery capability.

Additional Machine Features

Details on other functionalities like LCD, safety mechanisms, and thread info.

Manual Navigation and Initial Setup

How to Search Information in the Manual

Methods for finding specific information within the manual using titles or keywords.

Getting Ready: Initial Setup Procedures

Steps for identifying parts, accessories, and setting up the machine.

Embroidering Tutorial: Core Operations

Operating Precautions

Crucial safety measures for powering on, needle, and bobbin handling during operation.

Needle and Bobbin Management

Essential precautions for proper needle and bobbin usage.

Pattern Selection and Editing

Guidance on choosing, modifying, and previewing embroidery patterns.

Hooping Fabric and Frame Attachment

Instructions for properly hooping fabric and attaching the embroidery frame securely.

Upper Threading and Sewing Process

Procedures for threading the upper thread and initiating the embroidery sewing process.

Other Basic Procedures and Settings

Needle Replacement and Frame Management

Detailed steps for changing needles and correctly using embroidery frames.

Thread Tension Adjustment

How to adjust thread tension for optimal stitch quality.

Saving and Managing Patterns

Instructions for saving, editing, and deleting embroidery patterns.

Embroidering Settings Configuration

Automatic Lock Stitch and Speed Settings

How to configure automatic lock stitches and maximum sewing speed.

Color Change and Needle Bar Settings

Managing machine behavior during color changes and needle bar assignments.

Reserved Needle Bar Settings

Manually assigning specific thread colors to needle bars.

Basic Settings and Help Features

Using the Settings Key

Guide to accessing and adjusting machine settings via the dedicated settings key.

Troubleshooting and Error Resolution

Guidance on diagnosing and resolving common machine issues and error messages.

Appendix: Additional Information

Appliqué Sewing Guide

Step-by-step instructions for performing appliqué sewing techniques.

Maintenance Procedures

Guidelines for cleaning and oiling the machine to ensure proper function.

Machine Specifications

Technical specifications of the embroidery machine.

Index

Alphabetical listing of topics and their corresponding page numbers for quick reference.