Using the Device Settings (for Windows)
To use the Device settings, please follow the steps below:
1. Open the Printer Setting Tool.
Refer to the FAQ: "Using the Printer Setting Tool (for Windows)".
2. Select Device settings.
The Device settings window appears.
3. Specify or change the settings.
Auto power off when AC adapter is connected
Specify the amount of time that passes before the printer turns off automatically.
Available settings: None, 10/20/30/40/50 minutes, 1/2/4/8/12 hours
Auto power off when running on lithium-ion battery
Specify the amount of time that passes before the printer turns off automatically.
Available settings: None, 10/20/30/40/50 minutes, 1 hour
Contents
Specifies the printer information that will be printed.
Available settings: All, Usage Log, Printer Settings
Length adjustment
Adjusts the length of the printed label to correspond to the length of the label displayed on the computer.
Available settings: -3% to +3% (1% increments)
Print test
Prints a test label to check the length adjustment results.
Menu Bar
Select a command contained in each menu from the list.
For details on the menu bar, see Menu Bar.
Current Settings
Click this button to retrieve the settings from the currently connected printer and display them in the dialog box.
Exit
Exits Communication settings, and returns to the main window of the Printer Setting Tool.
Apply
Click Apply to apply the settings to the printer.
To save the specified settings in a command file, select Save in Command File from the drop-down menu.
4. After changing the settings, click Apply - Exit, and then click Exit in the main window to finish specifying settings.
Menu Bar
File menu
Apply Settings to the Printer
Applies the settings to the printer. Performs the same operation as when the Apply button is clicked.
Save Settings in Command File
Saves the specified settings in a command file. The file extension is ".bin".
The saved command file can be used with the BRAdmin utility to apply the settings to a machine.
Import
Imports the exported file and applies the settings to this tool.
Export
Saves the current settings in a file.
Tool menu
Print Information Report
Prints the printer information.
Reset to Factory Defaults
Returns all printer settings to their factory defaults.
Option Settings
If the Do not display an error message if the current settings cannot be retrieved at startup. check box is selected, a message will not be displayed next time.
© 2001-2020 Brother Industries, Ltd. All Rights Reserved.
Any trade names and product names of companies appearing on Brother products, related documents and any other materials are all trademarks or registered trademarks of those respective companies.
To Next Page
Loading...
