RH-9800 1/17
2002.10
RH−9800
Electronic Eyelet Button Holer
Specifications
Specifications
−00 −01 −02
Main use Men’s clothes and ladies’ clothes Jeans and work clothes
Sewing speed
1,000−2,000 rpm (100−rpm steps)
Buttonhole length
10 − 50mm 10 − 38 mm
L1: 14 − 18 mm L5: 28 − 32 mm
L2: 18 − 22 mm L6: 32 − 36 mm
L3: 22 − 26 mm L7: 36 − 40 mm
L4: 26 − 30 mm
Stitch length
0.5 − 2.0 mm (0.1 mm steps)
Stitch width
1.5 − 3.2 mm
Tacking length
0 mm, 3 − 43 mm (1 mm steps)
Cloth presser height 12 mm 16 mm
Stitch shape changing Selected by a program
Cut timing selection Selected by a switch
Starting method Dual switch (cloth presser switch and start switch) or single switch
Feed method
Intermittent feed by three pulse motors (X, Y, θ)
Needle
DO × 558 #80 − #120
（
Schumetz
）
Safety equipment
Built−in emergency stop function and automatic stopping device which stops the machine
when the safety circuit is activated.
Air pressure
Main regulator: 0.49 Mpa
Knife pressure regulator: 0.3 Mpa
Air consumption 43.2 l / min (8 cycle / min)
Noise level 81 dB at max. speed of 2,000 rpm, measured according to ISO 10821
Dimensions
1,200 mm (W) × 590 mm (D) × 1,120 mm (H)
Work table legs
T−shaped height−adjustable type
Power supply
Single−phase 110, 200, 220, 230, 240 V
Three phase 220, 380, 415 V
Max. electric power consumption: 1kVA
Weight 175 kg
To Next Page
Need help?
General
