60
Repacking the Machine
Keep the carton and packing materials. You may have to take or send the machine to be repaired or wish to
move the machine. If you do not pack it properly, or do not use the right packing material, the machine could
be damaged.
Please follow the diagram below for repacking.
The fabric does
not feed.
The darning plate is fitted on the
needle plate.
Remove the darning plate.
–
You have not used the right combi-
nation of fabric, thread and needle.
Choose a thread and needle that are
appropriate for the type of fabric.
page 29
The thread is tangled, for example,
in the shuttle.
Remove the tangle thread. If the
thread is tangled in the shuttle, clean
the shuttle.
page 55
The sewing light
bulb does not
come on.
The sewing light bulb is damaged. Replace the sewing light bulb. page 54
●
This packing material is designed to prevent damage. Save this packing material if you need to
move the machine or take or send this machine to be repaired.
Symptom Possible cause How to put it right Reference
IMPORTANT
To Next Page
Loading...
Need help?
General
