How to fix thread tangling on the wrong side of fabric with Brother XR9500PRW Sewing Machine?
If the thread is tangling on the wrong side of the fabric with your Brother Sewing Machine, the upper thread was likely not threaded correctly. Correct the upper threading.
What to do if the stitch is not sewn correctly with Brother Sewing Machine?
If the stitch is not sewn correctly on your Brother Sewing Machine, attach the presser foot that is correct for the type of stitch that you want to sew. Adjust the tension of the upper thread. Remove the tangled thread. If the thread is tangled in the bobbin case, clean the bobbin case. Adjust the stitch.
General| Buttonhole Styles | 8 |
|---|---|
| Maximum Stitch Width | 7 mm |
| Maximum Stitch Length | 5 mm |
| LCD Display | Yes |
| Needle Threader | Automatic |
| Bobbin Type | Drop-in |
| Speed Control | Yes |
| Drop Feed | Yes |
| Free Arm | Yes |
| Type | Computerized |
| Included Accessories | Wide table, seam ripper, cleaning brush, needles, bobbins, screwdriver, spool caps |
| Presser Feet | Buttonhole foot, Overcasting foot, Monogramming foot, Zipper foot, Zigzag foot, Blindstitch foot, Walking foot, Quilting foot |
| Warranty | 25 years limited warranty |
To Next Page
