Browning Command Ops Pro BTC-4P-16 - Multi Shot Mode Configuration

8
To program the MULTI SHOT mode, use the
RIGHT ARROW button to scroll through the
available options. Your Browning Trail
Camera can take multiple shots each time
the camera is triggered. The default setting
is 1 picture.Your options are as follows:
-MULTI SHOT OFF
This is the default setting. Your camera will
only take 1 picture when triggered.
-MULTI SHOT STANDARD
The selections available are 2-8 shots in
this mode. If you select 8-SHOT STANDARD,
your camera will take 8 pictures, spaced 2
seconds apart.
-RAPID FIRE
This selection allows rapid image capture.
When triggered, your camera will take 2-4
RAPID FIRE shots, with only 0.8 seconds
between pictures. Your available options
are 2,3 or 4 RAPID FIRE shots.
Press the DOWN arrow button to set the
TEMPERATURE UNITS.
Multi Shot Modes