BRP Rotax 4-TEC 150 ECT - Docking Mode; Docking Mode Activation Steps; Docking Mode Deactivation Steps

18
Docking Mode
To activate the Docking Mode:
• Reduce throttle speed to idle
• Press the Mode button until Docking is displayed
• Press the Set button once, the following message will be displayed: “Hold
Set To Activate Or Mode To Exit”
• Press and hold the Set button until Docking reappears
To cancel Docking Mode
• Press and hold the Mode button
• Move the throttle/shifter handle to the NEUTRAL position
Docking mode selections:
4
6
11
53
-12