EasyManuals Logo

BRP Rotax 4-TEC 200 ECT User Manual

BRP Rotax 4-TEC 200 ECT
64 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #20 background imageLoading...
Page #20 background image
16
Safety And Warranty Information
Even with the best boat design and construction, CO may still accumulate in enclosed or con-
fined areas under certain conditions. Continually observe passengers for symptoms of CO poi-
soning.
CO Detector
It is strongly recommended that you have CO detectors installed in boats with canvas enclo-
sures. Monitors are available from your dealer. Monitors should be professionally installed and
calibrated.
A CO detector is not a gas fuel vapor detector. Gas fuel vapor detectors do not monitor the
buildup of CO in an enclosed area.
DO NOT Operate your Boat Without Performing the Following Checklist:
Each Boating Use
B00061
OPERATION SIGN
Make sure you and your passengers know where exhaust outlets
are located on the vessel.
Educate all passengers about the symptoms of CO poisoning
and where CO may accumulate.
When docked or rafting with another boat, be aware of exhaust
emissions from the other boat.
Listen for any change in exhaust sound, which could indicate an
exhaust component failure.
Test the operation of each CO alarm by pressing the test button
(if applicable).

Other manuals for BRP Rotax 4-TEC 200 ECT

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the BRP Rotax 4-TEC 200 ECT and is the answer not in the manual?

BRP Rotax 4-TEC 200 ECT Specifications

General IconGeneral
BrandBRP
ModelRotax 4-TEC 200 ECT
CategoryEngine
LanguageEnglish

Related product manuals