BRP ROTAX 916 i A Series - Deactivate Fuel Pumps

To Next Page

To Previous Page

Effectivity: 916 i A / C24

Edition 0 / Rev. 1

BRP-Rotax Page 4-21

December 01 2023

NOTE

The ECU needs to deactivated before the fuel pumps. Shutting

of the engine by deactivating the fuel supply may result in fault

and failure entries in the ECU. Shutting down the engine by

shutting of the fuel pumps is only allowed in emergency

situations.

Step Step Description Procedure

5 Deactivate Fuel

pumps

HIC A: Disconnect Terminal 3

and Terminal 9 at 916 i Type A,

or at 916 i Type C24 Terminal E

and F to turn OFF Fuel pump 1.

HIC B: Disconnect Terminal 3

and Terminal 11 at 916 i Type A,

or at 916 i Type C24 AC-DC

Converter Terminal X4.C and

X4.D to turn OFF Fuel pump 2.

Example (Symbolic) Fuel pump 1: OFF

Fuel pump 2: OFF

Other manuals for BRP ROTAX 916 i A Series