BRU BRU100 - Advanced Brewing and Display Settings

19
editback
mult
i
steeping
activated
S5./S6./S7./S8 MULTI STEEPING/
DISPENSER/TIMER/COOL DOWN
You can decide to show or hide
these functions in your main
menu: multi steeping (M5.), the
dispenser (M6.), the timer mode
(M7.), the cool down mode (M8.)
activated: visible/shown
deactivated: invisible/hidden
BUTTON ACTION
MAIN press to set up the chosen
menu to be activated or
deactivated by turning the
main button, then pressing
‘save’
RIGHT
LEFT press to go back to M9.
machine setup
MAIN turn to go to other settings
editback
rinse
delay time
off
S4. RINSE DELAY TIME
Enables you to delay the rinse
to up to 60 sec after dispensing
the tea. This is a more advanced
setting, typically set to 0 (no de-
lay). Only use it after reading the
troubleshooting guide (see p. 27 -
problem 11)
BUTTON ACTION
MAIN press to set up the delay
time to your desired
amount of seconds by
turning the main button,
then pressing ‘save’
RIGHT
LEFT press to go back to M9.
machine setup
MAIN turn to go to other settings
editback
rinse
intensity
normal
S3. RINSE INTENSITY
Adjust the amount of water used
with the rinse function:
normal: suitable for most teas
intense: more water, longer rinse
short: less water, shorter rinse
BUTTON ACTION
MAIN press to set up the rinse
intensity to your preference
(normal, intense, short) by
turning the main button,
then pressing ‘save’
RIGHT
LEFT press to go back to M9. ma-
chine setup
MAIN turn to go to other settings
English