BRU BRU100 - Machine Settings; Time, Rinse, and Delay Settings

18
editback
current
time
12:39
S1. CURRENT TIME
Here you can adjust the time in
the machine which is used for
the timer mode (M7.) and also the
digital clock that can be used as
a screen saver (see S9.) You can
switch the time format from 12H
to 24H (see S14.)
BUTTON ACTION
MAIN press to set up the current
time in following order:
hours, minutes by turning
the main button, then pres-
sing ‘next’, then ‘save’
RIGHT
LEFT press to go back to M9.
machine setup
MAIN turn to go to other settings
editback
rinse
cup
S2. RINSE
The rinse function automatically
rinses the glass brewing chamber
(A11) with a little bit of fresh water
from the tank after each cycle. The
rinse can be set as:
cup: the rinse water (fresh water
from the tank) goes into your cup.
tray: the rinse water dispenses to
the magnetic drip tray (A5) after
you remove the cup.
off: rinse function is deactivated.
NOTE: A manual rinse can be star-
ted by pressing the main button
in the main menu (M1.) for longer
than 2 seconds.
BUTTON ACTION
MAIN press to set up the rinse to
your preference (cup, tray,
off) by turning the main but-
ton, then pressing ‘save’
RIGHT
LEFT press to go back to M9. ma-
chine setup
MAIN turn to go to other settings
MACHINE SETTINGS
English