BRU BRU100 - Cleaning Procedures; General Cleaning Guidelines and Precautions

23
cleAning
IMPORTANT!
• Do not use solvents, abrasive detergents or alcohol to clean the tea maker.
• Do not use metal objects to remove encrustations or tea leaves deposits as they could scratch the
metal, glass or plastic surfaces.
• If the appliance is not used for more than one week, before using it again, we strongly recommend you
perform a rinse cycle as described on p. 18 - rinse.
• When cleaning the glass brewing chamber manually please be careful with the spout/nozzle outlet of
the glass chamber to avoid damage and breaking glass.
DANGER!
• Never immerse the tea maker in water. It is an electrical device.
• Before cleaning the outside of the appliance, turn it off, unplug from the main socket and allow to
cool.
The following parts of the machine must be cleaned regularly:The following parts of the machine must be cleaned regularly: Dishwasher safe
• • Magnetic drip tray (A5) + drip tray plate (A16)Magnetic drip tray (A5) + drip tray plate (A16)
• • Glass brewing chamber (A11)Glass brewing chamber (A11)
• • Tea Sieve (A10) + tea sieve lid (A9)Tea Sieve (A10) + tea sieve lid (A9)
• • Silicone nozzle (A6)Silicone nozzle (A6)
• • Water tank (A3) + water tank lid (A4)Water tank (A3) + water tank lid (A4)
YES
YES
YES
YES
NO
CLEANING THE MAGNETIC DRIP TRAY (A5) + DRIP TRAY PLATE (A16)
1. Remove the drip tray (A5) from the machine.
2. Remove the drip tray plate (A16) from the drip tray.
3. Empty the water from the drip tray.
4. Clean the drip tray and drip tray plate in the dishwasher OR rinse and wash them with warm water and a little
mild dish soap, and dry with a cloth.
5. Reassemble the drip tray and put it back in place. If you need more instructions you can go to hps://bru.shop/
help.
English