CHAPTER 4
Type 4606 Features and Functions
39
4.1.2 The Cradle
The cradle is used for firmly holding and positioning handsets of almost any shape. The cradle
then attaches to the rest of the handset positioner for HATS, accurately locating the handset.
The cradle is crafted from precision, CNC machined aluminium and stainless steel parts for
accuracy and durability.
Fig.4.3 Cradle with mounted handset
Major Components of the Cradle
The centering forks (see Fig.4.3) have rubber grips (O-rings) for firmly holding the telephone
handset in place without marking or damaging it. The O-rings can be removed or placed
individually, so that they are only in contact with specified areas of the handset, avoiding
buttons, etc. The adjustment knob located at the bottom of the assembly allows the centering
forks to be offset and inclined. The knurled lock nut above it secures the assembly to the cradle.
The two centering forks can be placed in any two of the five sockets in the cradle. The five
O-ring
Foot
Centering
fork
Cradle
bar
Lock
nut
Support
foot
Yoke
Lock
nut
Centering fork
adjustment knob
Support
adjustment knob
To Next Page
Loading...
