Damper flap adjustment
If an optional damper flap
*
has been installed, it has to be opened com-
pletely when the fire is lit. For normal operation with closed door, the
damper flap can be closed up to 2/3, depending on chimney draught.
Combustion air supply
Proper functioning of a fireplace depends on the volume of combustion air
streaming into the room. Sufficient air supply must be ensured before fire
is lit. If an outside air flap is installed, it has to be opened and must be left
open as long fire is burning. Installed combustion air supply devices cannot
be modified.
Structural changes to the building
If changes are planned and made in or on the building, the conditions for
safe and proper operation of the fireplace can be significantly disrupted.
The prerequisites for safe operation of the fireplace must therefore be
checked by a specialist in the event of changes.
Such changes can be:
•
Installation of an additional fireplace
•
structural changes to the chimney
•
Installation or modification of ventilation devices, e.g. extractor hood,
toilet or bathroom ventilator, controlled ventilation
•
Installation or modification of corresponding household appliances, e.g.
exhaust air tumble dryer, central vacuum cleaner system
•
Changes to the building's tightness, e.g. due to the installation of new
windows or doors, insulation of roof surfaces, full thermal insulation
*
The damper flap is installed in the flue pipe connecting piece between
the heating insert and the chimney and regulates the chimney draft.
14 User Manual Panorama-Fireplace (1.47) © 2023 Brunner GmbH
To Next Page
Loading...
