Bruno SRE-2700 - CARTON CONTENTS AND CHECKLIST

©2004,2002 BRUNO INDEPENDENT LIVING AIDS, INC.®
SRE-2700 06-11-2004
6
PACKING LIST
CARTON CONTENTS
The ELECTRA-RIDE™ LT is shipped in 4 cartons. Check the
contents of the cartons to be sure you have all of the components
before beginning an installation.
Check the carton contents for shipping damage upon receipt.
Damage claims must be filed by the dealer, not the manufacturer.
Bruno Independent Living Aids, Inc.® cannot be responsible for shipping
damage.
CARTON 1
(1) complete carriage assembly including footrest
CARTON 2
(1) complete seat assembly
(2) IR transmitters
Box A
(1) tube
white lithium grease per rail set
(1) final limit switch ramp assembly
(1) SRE-K-1553 bumper assembly parts kit
(2) bumper assemblies
(2) pieces of Velcro®
(10) 11" lg wire ties
(1) SRE-K-2705 electrical parts kit (16' rail)
(or SRE-K-2706 for 20' rail)
(1) custom-length charge harness
(2) transmitter mounting brackets
(2) SRE-K-2701 transmitter mounting hardware kit
(1) power supply
(1) SRE-K-1518 power supply hardware kit
Box B
(9) foot clamp sets (16' RAIL) • 11 (20' RAIL)
• TBD** (CUSTOM RAIL)
**DEPENDS UPON RAIL LENGTH
(36) sheet metal screws (M 6.3 X 50 mm)(16' rail);
QTY.44 for (20' rail)
( ) UPON REQUEST clamps, adjustable, 9 lbs. ea.
CARTON 3
(1) rail half (upper)
CARTON 4
(1) rail half (lower)
(1) joint plate
(1) SRE-K-1502 joint plate hardware kit
CARTON 5 (OPTIONAL)
(1) rail half (lower)
(1) joint plate
(1) SRE-K-1502 joint plate hardware kit
CHECK CARTON
CONTENTS FOR
SHIPPING DAMAGE
IMMEDIATELY UPON
RECEIPT
*MSDS (Material Safety
Data Sheet) available
from Bruno upon
request. Contact
Service
Department.
***NOTE:
Rail sections must have
matching numbers
stamped on the
sections.