©2004,2002 BRUNO INDEPENDENT LIVING AIDS, INC.®
SRE-2700 06-11-2004
8
* Determine the appropriate location for the remaining mounting clamps and
brackets for attaching the rail to the stairs then loosely assemble the clamps
and brackets to the Stairway Elevator rail.
INSTALLATION
OVERVIEW (CON'T.)
* Adjust and tighten the rail clamps and mounting brackets.
* Anchor the mounting brackets to the stairs.
* Locate and drill holes for the top bumper bracket.
* Install the top bumper bracket.
* Determine where the power supply will be positioned, and install rail wire lead
accordingly.
* Position power supply at upper or lower landing.
* Route wire to household outlet.
* Mount remote call/send transmitters.
* Test unit for proper operation.
* Train customer in safe and convenient operation of the Stairway Elevator.
REMEMBER:
No installation is complete until the customer has been trained to use the Elevator
smoothly and safely. After demonstrating correct operation, have the customer
operate the Elevator several times while you are available to answer questions.
BE SURE THE CUSTOMER UNDERSTANDS ALL SAFETY ASPECTS OF
USING THE ELEVATOR. Patience and thoroughness in this phase of the
installation are often rewarded with repeat business and customer referrals.
OVERVIEW
To Next Page
