Brush Bandit 2000XP User Manual

STUMP GRINDER
MODELS 2000XP / 2100SP
OPERATING & PARTS MANUAL
MANUFACTURED BY
BANDIT INDUSTRIES, INC.
6750 Millbrook Road
REMUS, MICHIGAN, USA 49340
PHONE: (800) 952-0178 IN USA
PHONE: (989) 561-2270 OR 561-2272
FAX: (989) 561-2273 ~ SALES DEPT.
FAX: (989) 561-2962 ~ PARTS/SERVICE
E-MAIL: www.banditchippers.com
Model No: _________________
Serial No: _________________
DEALER:
Name: ____________________
Address: __________________
City/State: _________________
Phone No: _________________
Delivery Date: ______________
Engine Make: ______________
Serial No: _________________
Clutch Make: _______________
Model: _________ S/N _______
Copyright 5/09
ATTENTION:
Depending on what replacement
parts you are ordering, we will
need the following information:
GRINDER COMPONENTS
Serial Number
Model Number of Grinder
ENGINE COMPONENTS
Brand
Engine Serial Number
Engine Spec. Number
CLUTCH COMPONENTS
Brand
Serial Number
Assembly of Clutch
BUILT WITH QUALITY
AND DESIGN FIRST

Brush Bandit 2000XP Specifications

General

Brand	Brush Bandit
Model	2000XP
Category	Grinder
Language	English

Summary

Introduction & Warranty

Explanation of Limited Warranty

Details the terms, conditions, and limitations of the manufacturer's warranty.

Safety Procedures

Equipment Specifications

Provides key dimensions, weights, and capacities for the equipment.

Trouble Shooting Guide

Lists common problems and their solutions for the machine.

Machine Operation

Moving Without Power

Maintenance Section

Daily Start Up & Maintenance Checklist

Daily checks to perform before operating the machine.

Belt Tension

Hydraulic Section

Hydraulic Fluid Requirements

Specifies the type of hydraulic fluid and viscosity requirements.

Hydraulic Pressure Check

Procedures for checking and adjusting hydraulic pressure on models.

Cutter Wheel Section

Tooth Arrangement

Electrical Section

Model 2000XP Electrical Schematic