Bryant 315JAV - Page 8

8
CONTROLS − THERMOSTAT AND ZONING
DESCRIPTION PART NO.
NON‐PROGRAMMABLE
For use with 1‐speed Air Conditioner - deg. F/C, Auto Changeover T6-NAC, T2-NAC
For use with 1‐speed Heat Pump - deg. F/C, Auto Changeover T6-NHP, T2-NHP*
For use with 2‐speed Air Conditioner - deg. F/C, Auto Changeover T6-NRH*
For use with multi‐use / stage configurations - deg. F/C, Auto Changeover/Temperature and Humidity Control T6-PRH†
PROGRAMMABLE THERMOSTAT SELECTION
For use with 1‐speed Air Conditioner - deg. F/C, Auto Changeover, 7‐Day Programmable T6-PAC
For use with 1‐speed Heat Pump - deg. F/C, Auto Changeover, 7‐Day Programmable T6-PHP*
For use with 2‐speed Air Conditioner - deg. F/C, Auto Changeover, 7‐Day Programmable T6-PRH*
For use with 1‐speed Air Conditioner - deg. F/C, 5-2 Day Programmable T6-PAC
For use with multi‐stage applications - deg. F/C, Auto Changeover, 7‐Day Programmable T2-PHP‡
For multi‐use / stage configurations - deg. F/C, Auto Changeover, 7‐Day Programmable/Temperature and
Humidity Control
T6-PRH†
ZONING CONTROL SELECTION
Zone Perfect 3‐Zone kit ZONEBB3ZAC01, ZONEBB3ZHP01
Zone Perfect Plus 2‐Zone kit/Temperature and Humidity Control ZONEBB2KIT01‐B
Zone Perfect Plus 4‐Zone kit/Temperature and Humidity Control ZONEBB4KIT01‐B
Zone Perfect Plus 8‐Zone kit/Temperature and Humidity Control ZONEBB8KIT01‐B
EVOLUTIONt** CONTROLS
Evolutiont Control Deluxe 7‐Day Programmable (Wall‐mounted system control.) SYSTXBBUID01
Evolutiont Control Deluxe Zoning 7‐Day Programmable (Wall‐mounted control for a multi‐zone system.) SYSTXBBUIZ01
Evolutiont 4‐Zone Damper Control Module (Wall‐mounted control for a four‐zone system.) SYSTXBB4ZC02
Evolutiont Smart Sensor (Optional wall control used to monitor temperature and/or fan control in
an individual zone.)
SYSTXBBSMS01
Evolutiont Remote Room Sensor (Monitors temperature in an individual zone.) SYSTXBBRRS01
Evolutiont System Access Module (Hardware for wireless access and control via phone or internet.) SYSTXBBSAM01
Evolutiont Network Interface Module (Connects Heat Recovery and Energy Recovery Ventilators
or older two‐speed outdoor models to system.)
SYSTBBNIM01††
Decorative Back Plate for Evolutiont Control (Decorative wall plate.) SYSTXXXBPU01
* Model HP and 2S thermostat must be field converted to air conditioner operation.
† Thermidistat Control can be configured for multiple use and staging. It must be configured for each specific application.
‡ Dual Fuel thermostat is used with furnace and heat pump application.
** When applied with Bryant's Perfect Humidityt series 355AAV, 315AAV/JAV and FE Indoor Models
†† Must be installed in Dual‐Fuel Evolution system applications.
315AAV/JAV