1
925TA
PREFERREDt SERIES TWO--STAGE
4--WAY MULTIPOISE
CONDENSING GAS FURNACE, SERIES A
Product Data
A11264
The 925TA Multipoise SEER Boost Condensing Gas Furnace
features two--stage heating. The Perfect HeatR technology
two--stage gas valve is at the heart of the comfort provided by this
furnace, along with the multi--tap ECM blower motor, and
two--speed inducer motor. With an Annual Fuel Utilization
Efficiency (AFUE) of up to 96.2%, the Preferred two--stage gas
furnace provides exceptional savings when compared to standard
single--stage furnaces. This Preferred Gas Furnace also features
4--way multipoise installation flexibility, and available in six model
sizes. The 925TA can be vented for direct vent/two--pipe,
ventilated combustion air, or single--pipe applications. A Bryant
Preferred™ Control and Preferred or Preferred Air Conditioner or
Heat Pump, can be used to form a complete Preferred System. All
units meet California Air Quality Management District emission
requirements. All sizes are design certified in Canada.
STANDARD FEATURES
S Quiet operation. Compare for yourself at HVACpartners.com.
S All sizes meet ENERGY STARR Version 4.0 criteria for gas
furnaces: 95+ AFUE; AMACF electrical rating; 2% or less
cabinet airflow leakage.
S Ideal height 35” (889 mm) cabinet: short enough for taller coils,
but still allows enough room for service.
S Preferred Features—match with the Preferred Control for
Preferred System benefits.
S Silicon Nitride Perfect Light™ Hot Surface Igniter.
S SmartEvap™ technology helps control humidity levels in the
home when used with a compatible humidity control system.
S FanOnPlus™ technology allows control of continuous fan
speed from a compatible thermostat.
S External Media Filter Cabinet included.
S 4--way multipoise design for upflow, downflow or horizontal
installation, with unique vent elbow and optional
through--the--cabinet downflow venting capability.
S Approved for Twinning applications (42060 through 66120
sizes, only).
S Boost ECM multiple--speed blower motor, two--speed inducer
motor, and two--stage gas valve.
S Self--diagnostics.
S Adjustable blower speed for cooling, continuous fan, and
dehumidification.
S Aluminized--steel primary heat exchanger.
S Stainless--steel condensing secondary heat exchanger.
S Propane convertible (see Accessory list).
S Factory--configured ready for upflow applications.
S Fully--insulated casing including blower section.
S Convenient Air Purifier and Humidifier connections.
S Direct--vent/sealed combustion, single--pipe venting or
ventilated combustion air.
S Installation flexibility: (sidewall or vertical vent).
S Residential installations may be eligible for consumer financing
through the Retail Credit Program.
S Certified to leak 2% or less of nominal air conditioning CFM
delivered when pressurized to 1--in. water column with all
present air inlets, air outlets, and condensate drain port(s) sealed.
CERTIFIED
Always Ask For
Use of the AHRI Certified
TM
Mark indicates a
manufacturer’s participation in the program. For
verification of certification for individual products,
go to www.ahridirectory.org.
To Next Page
Need help?
General
