EasyManua.ls Logo

Bryant Evolution Connex SYSTXBBECW01 - System Configuration and Zone Naming; Selecting the System Heat Source; Customizing Zone Names

Bryant Evolution Connex SYSTXBBECW01
40 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
30
S To allow a photo to act as a screen saver, touch ENABLE;otherwise,
touch DISABLE.
S To allow a buzzer to sound on each touch of the screen, touch EN-
ABLE; otherwise, touch DISABLE.
Heat Source (if a pplicable)
With the Evolution Connex Control, you can select the desired heat source of your
system, if your system is equipped as a Hybrid HeatR System. Select the HEAT
SOURCE icon from the menu screen.
A12498
S The default is for the system to control the heat source.
S To have only the furnace control, select FURNACE ONLY.
S To have only the heat pump, select HEAT PUMP ONLY.
S When you have made the appropriate selection, touch SAVE.
Zone Names (If Applicable)
With the Evolution Connex Control, you have the ability to customize zone names.
Select the ZONE NAMES icon from the menu screen.

Other manuals for Bryant Evolution Connex SYSTXBBECW01

Related product manuals