Bryant NON-PROGRAMMABLE THERMOSTAT User Manual

16
Advanced Options
Changing from Fahrenheit to Celsius
Your thermostat is preset to display the temperature in degrees
Fahrenheit. You can change this to Celsius.
1. Press and hold the
mode button for about three
seconds. The display will show
U1 and the letter F
in the center.
2. Press the
up or down button on the right to change it
from
F (Fahrenheit) to C (Celsius).
3. Press the
fan button on the left to exit this screen.

Bryant NON-PROGRAMMABLE THERMOSTAT Specifications

General

Brand	Bryant
Model	NON-PROGRAMMABLE THERMOSTAT
Category	Thermostat
Language	English