EasyManuals Logo

Bryant Preferredt Series User Manual

Bryant Preferredt Series
68 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #34 background imageLoading...
Page #34 background image
32
When the keypad lock selection is turned on, the padlock icon will be displayed. To
unlock the keypad, press and hold the UP/DOWN buttons simultaneously for five
seconds. When the keypad is unlocked, the padlock icon will turn off. The keypad
will remain unlocked for two minutes after the last button press. After two minutes
with no button presses, the keypad will lock again. The keypad will not lock in the
software configuration mode or in the installer test mode.
Default is O F (off).
Option 21 Keypad Lockout (non- programmable models only)
This selection allows the installer to limit access to the keypad. Selections are OF
(off), 1, 2.
OF (off) The user has full access to the keypad.
1 The user has access to change the setpoints.
2 The entire keypad is locked. When a button is pressed, the backlight will turn
on but none of the operating parameters will be changed.
When the keypad lock selection is turned on, the padlock icon will be displayed. To
unlock the keypad, press and hold the UP/DOWN buttons simultaneously for five
seconds. When the keypad is unlocked, the padlock icon will turn off. The keypad
will remain unlocked for two minutes after the last button press. After two minutes
with no button presses, the keypad will lock again. The keypad will not lock in the
software configuration mode or in the installer test mode.
Default is O F (off).

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Bryant Preferredt Series and is the answer not in the manual?

Bryant Preferredt Series Specifications

General IconGeneral
BrandBryant
ModelPreferredt Series
CategoryThermostat
LanguageEnglish

Related product manuals