10/23
OWNER'S MANUAL & WARRANTY
BSI, LLC 601 East 64th Avenue, Bldg. A, Denver, CO 80229 800.662.9595 sales@bsidesigns.com bsidesigns.com
AdjustaGuard
4
SAFETY PRECAUTIONS
The AdjustaGuard food guard must be installed
in accordance with applicable installation code by
a person familiar with the product's construction,
operation, and potential hazards involved.
Care should be taken during unloading and
uncrating to avoid equipment damage.
1. Visually inspect the package, skid, or container
exterior. Any damage should be noted and
reported to the delivering carrier immediately.
2. Open and inspect contents for broken glass
and verify that all items were received.
3. In the event that damage is discovered, notify
the carrier and request freight damage forms.
4. Request an inspection by the shipping
company of the damaged equipment. This
should be done within 10 days of equipment
receipt.
5. Retain all crating materials until an inspection
has been made or waived.
6. All packages contain a product owner's
manual and warranty document, along with
installation drawings for your installer.
RECEIPT AND INSPECTION
OF EQUIPMENT
ADJUSTAGUARD MODELS
All AdjustaGuard models are certified by NSF.
AdjustaGuard food guards are manufactured
in many different configurations. While the
components are similar, your model’s glass and
posts may not be. The models shown below should
be maintained in the same manner based on the
instructions within this manual.
COMPONENT
EA100 EA100A
EA101A EA101A-2
EA101A-3 EA101A-5
EA112A
To Next Page
Loading...