20
eFax 2000 - Edition 4 – 14th November ’00 (3313)
Using Online Help
For general information about using JetSuite Pro,
choose Help Contents (the Contents command in
the Help menu).
If you want help on a specific JetSuite Pro menu
command or toolbar button, follow these steps:
1. Click the ? button in the toolbar. Your cursor
changes to a ?
2. Choose the menu command or click on the
toolbar button you want to know more about.
➚
Please note
Do not attempt to send a second fax via your eF@x
2000 software while a current fax is already in progress
as this may disconnect the current fax.
Depending on your software application, DOS printing
may not be possible in Windows NT4.0
If the Fax Status Monitor shows the wrong
number or transmission speed
When using your eF@x 2000 software, while a
document is being sent to the correct number at the
correct speed, the Fax Status Monitor may occasionally
display the wrong number or transmission speed.
You can check the fax details as follows:
• Select the Fax Send folder and highlight the
individual fax from the list.
• Select File to open the drop-down menu.
• Select Properties to display the fax number and
transmission speed details.
For further information, see the README.TXT file
after installation.
Minimum system requirements
33Mhz 486 PC
16MB RAM memory
8MB of permanent swap file space
(Win.3.111/Windows for Workgroups)
20MB of free disk space
256 colour video driver
Bi-directional Parallel printer port
Win 31, Windows for Workgroups 3.11 or Win 95,
Win 98 or Win NT4.0.
Windows NT4.0 requires Pentium 90 and 16 to
32MB of RAM
Recommended system requirements
166Mhz 486 PC
32MB RAM memory
16MB of permanent swap file space
(Win.3.111/Windows for Workgroups)
50MB of free disk space
256 colour or higher video driver
Bi-directional Parallel printer port
Win 95, Win 98
JetFax, JetSuite, and JetShare are trademarks of
JetFax, Inc.
All other brand or product names are trademarks
or registered trademarks of their respective
companies or organisations.