10
eFax 2000 - Edition 4 – 14th November ’00 (3313)
Insert the tabs of the Received Document Tray into
the slots at the front of the machine until they click
into place.
Setting up
1 Plan the location of your eF@x 2000
Situate your machine close enough to both
telephone and mains power sockets so that the
cables will reach.
Make sure the surface is stable and flat.
2 Install the paper trays
Insert the tabs of the Paper Tray into the slots at the
rear of the machine.
Insert the Document Tray into the long slot on top
of the machine until it clicks into place.
3 Install the Toner Cartridge
Remove the protective sheet from the document
feeder.
Open the top cover.
To Next Page
Loading...
Need help?
General
