BT 2000 User Manual

31
eFax 2000 - Edition 4 – 14th November ’00 (3313)
To store an Auto Dial entry
Press SELECT FUNCTION.
Press
LOCATION PROG. Display shows
LOCATION PROGRAMMING
Press AUTO DIAL.
Enter the 2 digit number between 01- 70
under which you want to store the entry.
Enter the fax number.
Press
START to confirm.
Enter the name – up to 15 characters.
Press
START to confirm. Display shows
AUTO DIAL NO. [ ] ENTER 01-70
Enter another two-digit number to store
another name and number.
Or
Press to return to standby.
Auto Dial directory
Your eF@x 2000 can hold up to 70 names and
numbers in the Auto Dial directory. Each entry can
hold up to 32 digits and 15 characters.
START
START
AUTO DIAL
SELECT
FUNCTION
SELECT
FUNCTION
LOCATION
PROG.
To dial an Auto Dial number
Insert the document to be faxed into the
document feeder tray.
Press
AUTO DIAL.
Enter the 2-digit location you want.
Press the
START button. The number is
dialled.
Chain dialling numbers longer than 32 digits
If you need to dial a number longer than 32
digits you can use Chain Dialling where you
store the number in two One Touch or Auto
Dial locations.
Creating a Chain Dial number
• Store the first 31 digits as a One Touch or
Auto Dial entry.
• Then press the 8/+ ONE TOUCH button to
make it a chain dial number.
• Store the rest of the number in another
One Touch or Auto Dial entry.
Dialling a Chain Dial number
• Select the One Touch button or Auto Dial
entry containing the first part of the number
(which must end with a +). Display shows
PRESS OT/AD/SRCH KEY .
• Now select the next One Touch or Auto Dial
entry containing the second part of the
number, or enter the rest of the number
manually using the keypad.
• Press the START button. The chain number
is dialled.
AUTO DIAL
START

BT 2000 Specifications

General

Type	Cordless Telephone
Answering Machine	Yes
Caller ID	Yes
Phonebook Capacity	50
Number of Handsets	1
Range Indoor	50 meters
Range Outdoor	300m