60
eFax 2000 - Edition 4 – 14th November ’00 (3313)
12: DISTINCTIVE RING
Distinctive ringing is a service offered by BT and
other networks that allows you to have two telephone
numbers on the same line, each with its own
distinctive ring. This enables you to separate calls,
for example, into business and personal. If you have
distinctive ringing you will need to adjust this function.
See ‘To set distinctive ringing’, page 63. For more
information contact BT or your network.
Original setting = OFF.
13: 1’ST PAPER SIZE A4, LET, LGL13, LGL14,
OTHER
You can set what size paper you are using in the
paper tray of your machine so that it prints out on
the correct area. Original setting = A4.
14: USER LANGUAGE ENG or FRE
You can switch between the two languages, English
or French, used for the display. Original setting =
ENGLISH.
15: INCOMING RING ON, OFF or DRC
You can set the type of ring you hear for incoming
calls. When set to Off, your machine will not ring for
incoming calls. When switched On, you machine only
rings when set to Manual receive mode or when
11:
RING RESPONSE
is set to 5-20 seconds (except 1 ring).
When set to DRC, you machine rings for each
incoming call with the same tone, even if you have
12:
DISTINCTIVE RING
switched on. Original setting = ON.
If your machine is set to Telephone/Fax mode, the
recommended setting is 1 ring.
07: BUZZER VOLUME HIGH, MID, LOW
You can set the volume for the secondary ringing tone
your hear when your machine is set to
TEL/FAX AUTO
SW MODE
. It also adjusts the volume of the alarm tone
your machine produces. Original setting = HIGH.
08: CLOSED NETWORK OFF. T/R and RX
You can set your machine only to send and/or
receive faxes from numbers stored in the One Touch
and Auto Dial directories.
If you do not want you machine to send faxes or
receive faxes from other numbers, select T/R. if you
only want you machine to refuse faxes from other
numbers, select RX. Original setting = OFF.
09: TX MODE DEFAULT
You can change the default resolution and contrast
settings for sending faxes and copying documents.
Original settings = STANDARD and NORMAL.
10: T/F TIMER PRG 20 or 35 SECONDS
When set to telephone/fax answering mode your
machine automatically distinguishes between
incoming voice and fax calls. If it is a voice call, your
machine tells you to pick up the handset connected
to the TAD socket. If you do not answer, the machine
automatically switches to fax mode to enable the caller
to send a fax. The T/F TIMER function sets how long
your machine waits for you to answer the call before
switching back to fax mode. Original setting = 20 SECS.
11: RING RESPONSE 1 RING, 5, 10, 15 or
20 SECONDS
This sets how long your machine waits before
answering an incoming call when it is set to Auto or
Telephone/Fax answering modes.
Original setting = 1 RING.
To Next Page
Loading...
Need help?
General
