1 Plug one extender near
your router
1 Plug one end of the ethernet cable into a spare ethernet socket on your router/hub.
2 Plug the other end into either of the extenders.
IMPORTANT: to work properly, extenders must be plugged directly into the wall
socket and not into extension leads.
3 Plug the extender directly into a wall power socket. Make sure the socket’s switched on.
1
2
3
2 Plug one extender near
your device
1 Plug the other extender directly into a wall power socket near the device you want
to connect. Make sure the socket’s switched on.
2 Wait for connection to complete. Give it a couple of minutes. If everything’s okay,
the Power and Data indicators on both extenders will light up.
See Connection help overleaf if the Data indicator doesn’t light up on the extenders.
To Next Page
Loading...
