Link button
What do you want to do? Press and hold button
Prepare to join a new network 5 to 8 seconds
Join a new network 1 second
Reset to factory settings More than 15 seconds until Data and Power lights go out
TIP: you may find it helpful to use a watch or a clock when using the Link button.
How to add more Powerline extenders to your
existing network
You can expand your home network by adding more extenders to your existing kit.
1 Plug your additional broadband extender directly into a wall power socket.
Make sure the socket’s switched on.
2 Press the Link button on that extender for 5 to 8 seconds. Wait for the Power light to
go back to steady green.
3 Press the Link button again, this time for 1 second.
4 Within 2 minutes, press the Link button on one of the broadband extenders already
in your home for 1 second to complete the connection to the network.
5 Wait for connection to complete. If everything’s okay, the Power and Data indicators
on the extender will light up.
TIP: you might find it easier to plug your new broadband extender in the same
double power socket or near one of your existing ones whilst you set things up.
Reset to factory settings
If your broadband extenders stop working or become unpaired, you can reset both
extenders to their factory settings:
1 Make sure the broadband extender is plugged in and the power socket’s switched on.
2 Press the Link button for more than 15 seconds until the Data and Power lights
go out. If everything’s okay, the Power indicator on the extenders will light up.
For detailed instructions and technical information for setting up the extenders, please
see the Frequently Asked Questions at bt.com/producthelp
To Next Page
Loading...
