EasyManuals Logo

BT 90 User Manual

BT 90
38 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #10 background imageLoading...
Page #10 background image
Setting up
8
7 Plug the phone into the
BT socket
You can now use the phone, store
numbers in the memory and
change some of the settings as
desired.
The charging light will remain
constantly lit while the handset is
placed on the base unit.
As a rule, placing the handset on
the base unit overnight will keep
the battery fully charged for all
normal use.
Battery care
The battery cannot be overcharged.
However, leaving the handset on the
base unit all the time can deteriorate a
rechargeable battery. To get the longest
possible life from your battery, take the
handset off the base unit for a few
hours each day.
When fully charged and in good
condition, the handset battery will
provide up to 5 hours continuous talk
time or 72 hours standby.
If the handset battery is running low,
the BATT LOW light will flash every
10-15 seconds.
If you are making a call and the
handset battery is running low, the
phone will beep every 10-15 seconds.
Place the handset on the base unit to
recharge.
BATT
LOW

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the BT 90 and is the answer not in the manual?

BT 90 Specifications

General IconGeneral
Answering machineYes
GAP compatibleYes
Phonebook capacity50 entries
Caller IDYes
Polyphonic ringtonesYes
Number of handsets included1
Call WaitingYes
Conference CallYes
IntercomYes
Maximum indoor range50 meters
Maximum outdoor range300 m
Talk time10 hours
Standby time100 hours
Frequency1.88 - 1.90 GHz

Related product manuals